1.8" Turbo Speed
PATA ZIF 5mm SSD The SaberTooth ZF is a lightning
fast 1.8-inch SSD with parallel ATA (PATA / IDE) ZIF interface,
and is compatible with most notebooks that use 1.8"
PATA ZIF hard drives. SaberTooth ZF, in a slim 5mm case,
is offered in 32GB, 64GB, 128GB and 256GB capacities.
It is one of the fastest and easiest ways to upgrade MacBook®
Air, HP Inspiron® Mini 12, select models of Sony®
Vaio and dozens of other mini netbooks to higher performance
and more local storage. With sequential read speeds up
to 130MB/sec, you can enjoy lightning fast bootup and
application load times and have enough drive space to
store all your important documents. The SaberTooth ZF
consumes far less power than a 1.8-inch HDD, which means
you'll enjoy longer battery life and greater productivity.
Features - Rugged and reliable - no moving
parts
- Made with MLC NAND Flash
- Power saving circuitry helps extend battery life
- ECC Error Correction for server-class reliability
- Bad bit management maps out bad bits to prevent errors
- Sophisticated wear leveling algorithm ensures a long
usable lifetime
- Includes screwdriver and installlation guide
- 1-Year warranty
Compatibility SaberTooth ZF is interchangeable with
standard 1.8-inch PATA ZIF hard drives, and works in most
systems that uses a 40-pin ZIF connector with PATA interface.
We also offer the SaberTooth Z, a mini 1.8-inch PATA ZIF
SSD that measures only 54 x 32 mm. We recommend you check
the specs of your system before buying to ensure you order
the right size ZIF SSD. This is a partial list of compatible
systems.
Advantages Faster
bootup and application load speeds
Lighter weight than a HDD
No moving parts
Silent operation
Produces less heat than a HDD
More rugged and reliable than HDD
Get unbelievably fast performance from your netbook with
a simple SSD upgrade! more>>
Specifications
Sequential Read Speed
Up to 130MB/sec
Sequential Write Speed
Up to 90MB/sec (75MB/sec for 32GB and 64GB
models)
Signaling
Parallel ATA / IDE
Connector
40-pin ZIF
Controller
EastWho
Data Retention
10 years
Dimensions
2.8 x 2.1 x 0.2 inches (70 x 54 x 5 mm)
Operating Temperature
0C - 70C
Input Voltage
3.3V +/- 5%
Operating System Compatibility
Windows 7, Vista, XP, 2000; Linux, Mac OS 10.x
Capacities
32GB, 64GB, 128GB, 256GB
Ordering Information
Drive
Cloning Adapter The fastest
and easiest way to get your new SSD up and running is by
cloning the contents of your existing HDD onto the SSD.
Our AUSB-IDE adapter allows you to plug your ZIF SSD into
any USB port. This adapter is sold separately. ZIF cables
are included. USB cable and cloning software not included.
Usable capacity is less than specified after
formatting. Actual performance varies depending on system configuration,
application and other factors.